电控柴油机产品ECU标定系统的开发与实现  

Development and Implementation of Calibration System for ECU in Electronically-Controlled Diesel Engine

作　　者：穆春阳[1] 孙立宁[1] 杜志江[1] 陈燕春[2] 

机构地区：[1]哈尔滨工业大学机器人研究所,哈尔滨150001 [2]一汽技术中心基础部电控单元开发室,长春130011

出　　处：《汽车工程》2007年第7期586-589,共4页Automotive Engineering

基　　金：国家"863"高技术研究发展计划基金项目(2003AA1Z2141)资助

摘　　要：基于CAN总线,采用CCP协议,使用商业化标定软件CANape作为标定系统的上位机软件,针对电控柴油机产品ECU开发了一套标定系统。该标定系统在一汽生产的6DE和6DL系列柴油机的标定工作中得到了应用,试验结果表明该标定系统可以满足标定工作的全部需要,明显地改善了发动机的性能和排放。Based on CAN bus and CCP protocol, and using CANape as the software of its master machine, a calibration system for ECU products of electronically-controlled diesel engine is developed. The system has been used in the calibration of 6DE and 6DL series diesel engines made in FAW Group. The results show that the calibration system can meet all the requirements of calibration, leading to evident improvement in performance and emissions of the engine.

关 键 词：电控柴油机 CAN总线 CCP协议 ECU 标定系统 

分 类 号：U464.172[机械工程—车辆工程]