热固性树脂体系流变特性随贮存条件变化规律  

Effects of storage condition on rheological properties for typical thermosetting resins

作　　者：周文[1] 张佐光[1] 顾轶卓[1] 李敏[1] 

机构地区：[1]北京航空航天大学材料科学与工程学院,北京100083

出　　处：《复合材料学报》2007年第4期40-45,共6页Acta Materiae Compositae Sinica

基　　金：国家973项目(2003CB615602)

摘　　要：热固性树脂体系在贮存期间会发生物理或化学变化,这会影响树脂体系的流变特性,进而影响其成型工艺性。本文中针对几种典型热压工艺用高性能热固性树脂体系,采用平板流变仪研究了贮存期对树脂体系流变特性的影响,并利用差示扫描量热法、红外光谱法和凝胶色谱法分析了流变特性变化的具体原因;同时以流动度为表征参数,考察了树脂体系工艺性随贮存期的变化规律。结果表明,树脂体系的贮存特性主要由其固化反应特性和添加剂的贮存特性决定。该研究结果为热压工艺参数的选择和优化提供了重要实验依据。In the storage process, physical or chemical changes might happen for thermosetting resins, which have effects on the rheological characteristics of resin systems and influence the processability. By means of parallel plates the effects of storage time on rheological properties of resin systems were studied for several typical thermosetting resin systems used in the hot press process. The reasons for the change of rheological characteristics were investigated with differential scanning calorimetry, infrared spectrometry and gel permeation chromatography. The influence of storage time on the processing property of resin systems was analyzed using the fluidity. The results show that the storage characteristics of resin systems are determined by the curing reaction of the resin system and the storage characteristic of addition agents in resin system. These results provide some important experimental information to the estimation and optimization of hot press process parameters.

关 键 词：复合材料 热压工艺 热固性树脂 贮存期 流变特性 

分 类 号：TB332[一般工业技术—材料科学与工程]