废旧橡胶/刨花复合工艺的研究  

Study on the technology of wood-rubber composite board

作　　者：李凯夫[1] 温福泉[1] 王栋梁[1] 黄杰[1] 詹晓丹[1] 

机构地区：[1]华南农业大学,广东广州510642

出　　处：《木材加工机械》2007年第4期1-4,共4页Wood Processing Machinery

基　　金：广东省农业攻关项目(2003B21302);华南农业大学大学生科技创新项目(L06035)

摘　　要：根据废旧橡胶颗粒特征,用炼塑机将其辊压处理后,加入一定量的偶联剂,研究了废旧橡胶/刨花复合工艺,通过极差分析和方差分析得到优化工艺参数为:橡:木配比为1:9,施胶量为10%,热压温度为170℃,热压时间为300s。用以上工艺参数制造的复合板材力学性能优异。On the basis of properties of waste rubber granules, the technology of wood-rubber composite board with UF adhesive was studied by way of orthogonal test and the technology parameters were optimized by differential and variance analysis, The rubber granules was pressed by machinery, then adding some coupling agent. Results showed that physical and mechanical properties of the board were excellent and suitable to be used as a kind of functional board.

关 键 词：废旧橡胶 刨花 工艺优化 

分 类 号：TS655[轻工技术与工程]