路面平整度及车辆振动模型的研究综述  

Review of Road Roughness and Vehicle Vibration Model

作　　者：刘云[1] 钱振东[1] 

机构地区：[1]东南大学智能运输系统研究中心,江苏南京210096

出　　处：《公路交通科技》2008年第1期51-57,共7页Journal of Highway and Transportation Research and Development

基　　金：国家自然科学基金资助项目(50578038)

摘　　要：为了在车-路或车-桥相互作用的耦合体系中更准确地模拟由路面不平整度引起的车辆动荷载,以及分析由动荷载引起的路面动响应,论述了路面平整度的各种定义,回顾了路面平整度的各项评价指标、评价方法及各种评价指标之间的关系。分类阐述了针对各种评价指标的现场检测方法及仪器,分析了路面平整度的各种数值模拟方法,并推荐了更符合实际情况的平整度数值模型,介绍了用于分析路面不平度引起的车辆动荷载的各种车辆振动模型。最后总结了研究路面平整度评价指标、不平度的数值模拟方法及车辆振动模型的发展趋势,提出了用于分析车辆与路面作用的耦合振动体系的各项参数的采用建议,为研究车辆随机动荷载作用下的路面或桥面动响应提供了理论依据。In order to simulate the vehicle dynamic load caused by mad roughness and analyze the dynamic response of pavement in the vehicle-mad or vehicle-bridge interaction system more precisely, the definitions of mad roughness were reviewed. The evolution indices, the evolution methods of mad roughness and the relationship among the evolution indices were introduced. The testing methods and instruments of mad roughness were classified and elaborated.Then the numerical simulation methods of mad roughness were analyzed, and the better numerical models which more approximate to practical situation were recommended. Afterwards, the vehicle vibration models used to analyze the dynamic load caused by mad roughness were introduced. At last, the evolution indices of mad roughness, the numerical simulation methods of mad roughness and the developing trend of vehicle vibration models were summarized. The suggestion on the various calculation parameters of coupling vibration which used to analyze the interaction between vehicles and mad surface was put forward. It is found that IRI should be the unified evolution index of road roughness. The ARMA model and AR model were recommended to simulate the random excitation. The study results can provide the theoretical basis for analysis of dynamic response of pavement under random dynamic load.

关 键 词：道路工程 路面平整度 数值模拟 振动模型 车辆动荷载 

分 类 号：U416.2[交通运输工程—道路与铁道工程]