检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘杰[1] 裴念强[2] 郭开华[2] 何振辉[2] 李廷勋[2] 顾建明[1]
机构地区:[1]上海交通大学制冷与低温研究所,上海200030 [2]中山大学工学院空间技术研究中心,广州510275
出 处:《核动力工程》2008年第1期96-100,128,共6页Nuclear Power Engineering
基 金:广东省人民政府科技专项;科技部国际科技合作重点项目计划(2003DF000050);973计划前期研究专项(2006CB708613);广东省自然科学基金(05003274)资助
摘 要:分析了机械泵驱动两相流冷却系统的工作原理、数学模型以及主要参数。在CO2为循环工质的实验台上,对机械泵驱动的主动式两相流冷却系统的主要部件的温度分布特性、阻力特性和流量特性进行了实验研究。对系统的热量传递特性进行计算分析。研究结果表明:冷凝边界的温度波动接近于30℃,在沿10 m的蒸发段,进出口温差能够保证小于0.3℃,温度随时间的波动小于0.4℃。分析表明,机械泵驱动两相流冷却系统具有较高的等温性和较稳定的传热特性;以机械泵为驱动力使得机械泵驱动两相流冷却系统以较小的能耗就能实现较大的热量传递,使主动式热控系统的工作能力得以提高。This paper analyzes the work principle, mathematical model and main parameters for the two-phase flow cooling system driven by mechanical pump. Temperature distribution, resistance and flow mass of main components in the active two-phase cooling system driven by mechanical pump are experimentally studied. Heat transfer of the system is calculated and analyzed. The study results indicate that: when the temperature wave of the condensation boundary approaches 30 ℃, the difference between inlet and outlet temperatures can be kept less than 0.3 ℃ and the temperature change with time is less than 0.4 ℃, along the 10 m evaporation section. Analysis indicates that the two-phase flow cooling system driven by mechanical pump is of well isothermal characteristics and stable heat transfer. Calculation and analysis also indicate that this system can realize larger heat transfer with smaller energy consumption, which improves the work capa- bility of the active heat control system.
分 类 号:TK124[动力工程及工程热物理—工程热物理]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.28