检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘焕荣[1,2] 柴宇博[1,2] 刘君良[1,2]
机构地区:[1]中国林科院木材工业研究所 [2]国家林业局木材科学与技术重点实验室,北京100091
出 处:《木材工业》2008年第1期26-28,共3页China Wood Industry
摘 要:采用热电偶法测量杨木单板层积材在热压过程中表层和芯层的温度的变化规律,讨论了施胶方式以及浸胶量和热压温度、压力对板坯在热压过程中传热的影响。结果表明:施胶量相当时,浸胶方式在快速升温阶段的升温速度较快;同时随着浸胶量的增加板坯传热速度增加,但浸胶量不影响板坯的总热压时间。Better understanding of heat transfer and resin curing during hot pressing will help optimize the wood composite manufacturing process in increasing productivity and improving product quality. Electrical-thermocouples were used in this study to investigate the effects of resin application methods, resin content, hot-pressing temperature, and pressure in hot-pressing poplar laminated veneer lumber (LVL). The results indicated that during the initial pressing stage, the internal temperature increased more rapidly by using a resin impregnation method than a resin spread method. It was found that higher resin content accelerated heat penetration towards the core. However, the resin content didn't significantly affect total hot-pressing time.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.33