基于蒙特卡罗仿真的战斗部参数优化设计  

Optimum Design of Warhead Parameters Based on Monte Carlo

作　　者：王玥[1] 李东光[1] 

机构地区：[1]北京理工大学爆炸科学与技术国家重点实验室,北京100081

出　　处：《系统仿真学报》2008年第4期1045-1048,共4页Journal of System Simulation

摘　　要：建立了基于蒙特卡罗仿真方法的战斗部毁伤效率评估模型,提出了将蒙特卡罗仿真结果下的毁伤概率最大作为战斗部威力设计原则,通过对各种设计参数取不同值时毁伤概率大小的对比,得到了各参数的最优值或最优取值范围。针对某特定雷达目标,应用此方法对战斗部参数进行优化,成功实现杀伤爆破战斗部的威力设计。Warhead damage efficiency evaluation model which based on Monte Carlo simulation method was established. Design rule which used damage probability maximization under result of Monte Carlo simulation was proposed. Through damage probability comparison among all kinds of design parameters that gave certain value, best range of these parameters were obtained. To certain radar target, parameters of warhead were optimized by this method and a frag-demolition warhead was designed successfully.

关 键 词：蒙特卡罗 MATLAB 战斗部 优化设计 

分 类 号：TJ410.2[兵器科学与技术—火炮、自动武器与弹药工程]