检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]湘潭大学土木工程与力学学院,湖南湘潭411105 [2]广州市市政工程安全质量监督站,广东广州510050
出 处:《河海大学学报(自然科学版)》2008年第1期97-101,共5页Journal of Hohai University(Natural Sciences)
基 金:国家自然科学基金(50408037);中国博士后科学基金(2003034279)
摘 要:为了使斜拉桥在成桥后达到合理状态,必须拟定合理的施工状态,即在施工过程中使斜拉索力和结构位形同时达到理想状态.采用一阶最优化计算方法,以成桥后结构的弯曲应变能和主梁的线形为目标函数,以斜拉索的初始张拉力和主梁节段的预抛高值为设计变量,建立了斜拉桥施工控制的空间非线性有限元分析模型,并以某大跨度预应力混凝土斜拉桥为例,模拟了混凝土主梁的悬臂浇筑过程.结果表明,该方法可使成桥后主梁的线形和结构的内力得到合理控制,从而可有效地确定斜拉桥的合理施工状态.Rational construction state, i.e. the cable prestress and structure alignment reach perfect condition simultaneously, should be defined, so that the cable-stayed bridge can reach rational state after the bridge construction. By use of the first order optimization calculation method, a nonlinear spatial finite element model for cable-stayed bridge construction control was developed with the bending strain energy of the bridge structure after construction and the alignment of the main girder taken as the objective functions and the initial tensile force of stayed cables and the prearranged height of main girder sections taken as the design variables. A case study was performed on a large-span cable-stayed prestressed concrete bridge, and the simulation of the pouring process of the cantilever of main concrete girders with the method shows that the method can effectively control the alignment of the main girders and the internal force of the bridge structure after the bridge construction, and thus it can efficiently determine the rational construction state of the cable-stayed bridge.
分 类 号:U443.38[建筑科学—桥梁与隧道工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.148.217.26