大采高综采面煤壁片帮特征分析与应用  

Characters of the Rib Spalling in Fully Mechanized Caving Face with Great Mining Height

作　　者：尹希文[1] 闫少宏[1] 安宇[2] 

机构地区：[1]煤炭科学研究总院开采研究分院,北京100013 [2]中国矿业大学资源与安全工程学院,北京100083

出　　处：《采矿与安全工程学报》2008年第2期222-225,共4页Journal of Mining & Safety Engineering

基　　金：国家“十一五”科技支撑计划项目(2006BAK03B06)

摘　　要：片帮问题是制约大采高综采面安全高效开采的主要因素之一,为了弄清大采高工作面煤壁片帮特征,采用压杆理论分析完整性较好的煤壁的挠度特征,得到了煤壁容易发生片帮的位置在煤壁的中上部,并与现场实测结果对比分析,得到了大采高综采面两种典型的片帮形式:半煤壁片帮和整个煤壁片帮.现场采取了提高护帮板的使用率,增加支架的实际初撑力和工作阻力,及时移架等片帮综合治理措施,减少了工作面煤壁的大块煤片帮现象.The rib spalling is one of the main factors restricting the safe and high efficient mining of fully-mechanized caving with great minng height. In order to make clear the rib spalling features, we analyzed the deflection feature of coal wall which is good in integrity based on shaft theory, showing that the place where rib spalling is likely to take place is the middle-up area of coal wall. The in-situ measurement and comparison shows that there are two typical rib spalling forms： rib spalling within an half coal wall and that in the whole coal wall. By taking the measures of improving the usage rate of rib-protective plate, increasing the support＇s initial suppoting force and resistance, and timely moving the supports, large blocks of rib spalling can be effectively reduced.

关 键 词：压杆理论 大采高综采 煤壁片帮 数值模拟 

分 类 号：TD323[矿业工程—矿井建设]