嵌入式钢丝起毛机控制系统开发  

Development of embedded system used in steel-wire nappers

作　　者：朱新杰[1] 沈加海 倪祖鑫 赵虹 

机构地区：[1]浙江大学机械与能源工程学院,浙江杭州310027 [2]海宁纺织机械厂,浙江海宁314400

出　　处：《纺织学报》2008年第10期109-112,共4页Journal of Textile Research

基　　金：国家科技部"科技型中小企业技术创新基金"项目(05C26113300746)

摘　　要：为优化钢丝起毛机控制系统,以移植有μC/OS-Ⅱ实时多任务内核的ARM平台为控制核心,通过RS-485总线实现对钢丝起毛机6个独立运动的控制,并能对用户的要求及各种故障信息做出迅速响应。给出整个控制系统的电气组成图,描述控制板的硬件组成及控制系统的软件结构,并结合生产实际对其性能进行分析。测试数据及试用情况表明,配备嵌入式控制系统的钢丝起毛机各项性能表现出色,具备了大面积推广的可行性。For optimizing the control system of the steel-wire napper, an embedded control system was developed, which use ARM platform implanted with the μC/OS-Ⅱ real time muhitask kernel as.the control centre and realize the control of the 6 separate motions of the napper through the Rs-485 bus. Meanwhile, it is capable of making rapid response to the user＇s request and various malfunction signals. The article gives the electric organization chart of the whole control system, describes the hardware and software configuration control system of the control board, and analyzes the performance of the system in practice. The test and probation shows that equipped with the embedded control system, the steel-wire napper exhibits excellent performances, and it is worthy of promotion for wide applications.

关 键 词：钢丝起毛机 嵌入式系统 ARM μC/OS-Ⅱ 变频器 

分 类 号：TS132.7[轻工技术与工程—纺织材料与纺织品设计]