高含水率染色、固色桦木单板的胶合性能探讨  

Bonding Property of Reconstituted Plywood Made from High Moisture Content Veneer

作　　者：桂成胜[1] 王晓钦[1] 王砥[1] 韦双颖[1] 

机构地区：[1]东北林业大学材料科学与工程学院,哈尔滨150040

出　　处：《中国人造板》2008年第10期11-13,共3页China Wood-Based Panels

基　　金："黑龙江省科学技术研究项目"湿固化异氰酸酯胶黏剂制造人造薄木的技术研究(11533017)

摘　　要：高含水率染色、固色单板的胶合质量是制造人造薄木的关键技术之一。试验比较、分析了不同含水率条件下,素板、染色、固色单板的胶合强度。结果表明:随着含水率的升高,素板、染色和固色桦木单板胶合强度均呈下降趋势,并且其湿状胶合强度均明显低于各自的干状胶合强度;素板的干湿状胶合强度均明显大于染色和固色单板。The bonding property of high moisture content dyed veneer and color fastening treated dyed veneer is one of the key parameters for reconstituted plywood manufacturing. The presented work compared and analyzed the bonding strength of the original veneer, dyeing veneer and color fastening treated veneer under different moisture content conditions. The result showed that as the moisture content increasing the bonding strength for all the veneers were decreased. Wet strength of these three kinds of veneers was lower than those of dry strength significantly. Dry strength and wet strength of original veneer were all higher than dyeing veneer and color fastening treated veneer.

关 键 词：人造薄木 染色 固色 湿固化异氰酸酯胶黏剂 胶合强度 

分 类 号：TS653[轻工技术与工程]