子午线轮胎硫化过程仿真  

Simulation of Radial Tire Curing Process

作　　者：施斌[1] 王国林[1] 张建[1] 董大鹏[1] 朱长顺[1] 

机构地区：[1]江苏大学

出　　处：《汽车技术》2008年第10期56-59,共4页Automobile Technology

摘　　要：根据对轮胎硫化程度的分析,利用ABAQUS软件对全钢子午线轮胎11.00R22.5建立了硫化温度场仿真模型,在此基础上利用阿累尼乌斯方程计算了轮胎各试验测温点处的硫化程度。仿真与硫化试验对比结果表明,仿真分析的硫化温度和硫化程度随时间的变化与试验结果相吻合,证明了所建有限元模型和计算方法的正确性。A curing temperature field simulation model was established for radial tire 11.00R22.5 in ABAQUS based on the analysis of tire curing degree.The curing degree of the tire on every measuring points was calculated with Arrhenius equation.By comparison of the simulation and tests results,it is found that the changes of curing temperature and curing degree with time in simulation analysis were consistent with test results,which validates the correctness of finite element analysis model and calculation method.

关 键 词：子午线轮胎 硫化 有限元分析 

分 类 号：U463.341.3[机械工程—车辆工程]