基于油雾润滑的高速电主轴断油性能试验研究  

Experimental Study on Interruption of Oil Supply about a High-speed

作　　者：左涛涛[1] 李松生[1] 毛华伟[1] 胡志宏[1] 刘思胜[1] 陈萍[1] 

机构地区：[1]上海大学机电工程与自动化学院,上海200072

出　　处：《润滑与密封》2008年第10期20-23,共4页Lubrication Engineering

基　　金："十五"国家重点科研攻关资助项目(No.MKPT-04-58D);上海市重点学科建设资助项目(Y0102)

摘　　要：对基于油雾润滑的高速电主轴进行断油性能试验,利用B&K声学/振动分析系统、红外热像仪等仪器对断油过程中高速电主轴系统的振动特性、主轴轴承内部的润滑、电主轴表面的温度场等状态参数进行监测,并与正常油雾润滑时高速电主轴的状态参数进行比较,分析研究了断油状态对高速电主轴工作性能的影响。试验结果表明:高速电主轴正常工作时主轴轴承所需要的润滑油量很少;短时间断油对电主轴系统的正常运行状态影响不大,主轴轴承内部的润滑、电主轴系统的振动特性和电主轴的热状态等性能参数能够维持在基本正常的水平。An interruption of oil supply experiment about a high-speed spindle based on oil-mist lunneanon was careen out. B＆K Sound/Vibration Analyzer, Infrared Thermal CAM and other apparatus were used to inspect and observe the dynamic characteristics of high-speed spindle, the lubrication state in spindle beating, the temperature field on high-speed spindle surface and other state parameters under the condition of interrupting to supply oil, and the state parameters were compared with those under normal oil-mist lubrication. The influence of interruption of oil supply on the work performance of high-speed spindle was analyzed. Experimental results indicate that the amount of oil needed in spindle bearing is very small when the high-speed spindle is in normally working. Interrupting to supply oil in a brief time has less influence on the normal work of high-speed spindle ,the lubrication state and the thermal state in spindle bearing can maintain in normal work situation.

关 键 词：高速电主轴 油雾润滑 断油试验 状态参数 

分 类 号：TH117.2[机械工程—机械设计及理论]