检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王永军[1] 张尽染[1] 谢友金[1] 赵加清[1] 吴建中
机构地区:[1]西北工业大学现代设计与集成制造技术教育部重点实验室,西安710072 [2]西安航空发动机有限公司,西安710021
出 处:《机械科学与技术》2008年第11期1361-1364,共4页Mechanical Science and Technology for Aerospace Engineering
摘 要:提出了一种利用直线段和圆弧逼近空间曲线的计算方法。其基本原理是,首先人为将空间曲线近似分解为一定数量的直线段和圆弧段,并给出切点的坐标值作为初值。然后用点到直线的平均距离以及点到圆弧的平均距离作为搜索目标,通过采用模式搜索算法,逐个切点坐标进行调整,经过多次循环迭代,最终获得与原空间曲线的误差为给定误差的由直线和圆弧组成的空间曲线。计算结果表明,该算法稳定,计算效率及精度高,适合于空间曲线的逼近。A method for approximating space curve by lines and arcs is proposed. Firstly, the original space curve is decomposed into lines and arcs that the coordinate values of the tangent points have been specified as the original value for iteration. Secondly, the average distance between points and the line as well as the average distance between points and the arc are set as the searching target through the mode searching algorithm to adjust the coordihate of tangent point one by one. The error between the approximate space curve and the original space curve can be reduced by iterative computations until it is within a specified error. The calculation result shows that the algorithm is stable with high efficiency and precision, and is suitable for approximating space curve.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.117