平面磨削温度场三维有限元仿真及其实验研究  

Three Dimensional FEM Simulation and Experimental Study on the Temperature Field in Surface Grinding

作　　者：周德旺[1] 周志雄[1] 毛聪[1] 刘金[1] 

机构地区：[1]湖南大学机械与运载工程学院,湖南长沙410082

出　　处：《制造技术与机床》2008年第12期70-75,共6页Manufacturing Technology & Machine Tool

基　　金：国家自然科学基金项目(50675063)

摘　　要：在考虑工件材料物理性能与温度的非线性关系情况下,采用三角形热源模型对一些典型的磨削工况进行了三维有限元仿真,获得了工件的温度分布。采用热电偶法测量了磨削温度,发现有限元仿真值与实验测量值相当吻合,仿真结果能够真实地反映工件的热状况。The physical properties of the workpiece material are considered to be non - linear according to the temperature in this paper. 3 D FEM simulations for some typical grinding conditions are carried out by using the triangle heat source model, and the distribution of workpiece＇s temperature field is obtained easily. The grinding temperature is measured by thermocouple method, and the simulation results are compared with those obtained from experimental measurements. A good agreement is found between the FEM results and experimental observations, so the simulation results show the workpiece＇s thermal conditions truly.

关 键 词：平面磨削 磨削温度场 有限元仿真 

分 类 号：TG580.1[金属学及工艺—金属切削加工及机床] TP212[自动化与计算机技术—检测技术与自动化装置]