中厚板的横向波浪矫直研究  

Research on Wave Leveling Model in Plate Steel

作　　者：王效岗[1,2] 黄庆学[2] 马勤[1] 

机构地区：[1]兰州理工大学,兰州730050 [2]太原科技大学,太原030024

出　　处：《中国机械工程》2009年第1期95-98,共4页China Mechanical Engineering

基　　金：国家自然科学基金资助项目(50575155);山西省科技攻关计划资助项目(2007031123-03);教育部新世纪人才支持计划资助项目(NECT-05-0268)

摘　　要：用几何分析和数值模拟相结合的方法,研究了具有横向浪形的中厚板在矫直过程中的演化。研究结果表明,具有横向浪形的中厚板可以通过辊式矫直得到矫直;在矫直过程中,浪形处弯曲应力层、应变层发生中性层偏移。由于板材中性层的偏移,使板材的不同部分产生延伸和压缩,这种效应明显地改善了板形。浪形矫直效果产生主要在第1矫直单元和第2矫直单元,随着矫直单元增加,平直精度进一步提高。同时增加压下量,矫直后平直精度将有所提高。Evolvement of plate wave in level was studied by using both analytic geometry and FEM . The analytic geometry and simulated results show that the relative accurate results can be obtained between analytic geometry and simulated results. It is possible that the roll leveler maybe smooth wave of plate and enhance the flatness of plate. It is occured that the offset of stress and strain layer in the level init. The effect of wave level exists in the first and second level unit , and the flatness of plate is increased in sequel level unit. The results show that the increasing the entance intermesh is the means of increasing flatness of plate.

关 键 词：中厚板 矫直 浪形 中性层 

分 类 号：TG333.2[金属学及工艺—金属压力加工]