13．9nm Laminar 分束光栅的研制  

13.9nm Laminar grating as beam splitter

作　　者：谭鑫[1,2] 刘颖[1] 徐向东[1] 洪义麟[1] 付绍军[1] 

机构地区：[1]中国科学技术大学国家同步辐射实验室,安徽合肥230029 [2]中国科学院长春光学精密机械与物理研究所,吉林长春130033

出　　处：《光学精密工程》2009年第1期33-37,共5页Optics and Precision Engineering

基　　金：国家自然科学基金委员会与中国工程物理研究院联合基金资助(No.10676032);国家863高技术探索基金资助项目;中国科学技术大学校青年基金资助项目

摘　　要：利用全息-离子束刻蚀工艺制作了工作波长为13.9 nm的Laminar分束光栅。光栅的线密度为1 000 lp/mm,槽深13 nm,占宽比0.43,Au膜厚度为40 nm左右;当工作波长为13.9 nm,入射角为81.2°时,其0级与-1级衍射光衍射效率乘积的最大值为8.1%,同时0级与-1级衍射效率亦接近,约为27%和30%。实验结果表明,研制的Laminar光栅可用于13.9 nm激光的分束,能够获得>7%的分束效率。A Laminar grating with a 1 000 lp/mm rectangular Laminar groove profile, 13 nm groove depth and a 0.43 duty cycle is fabricated by holographic ion beam etching. The grating is coated by Au in thickness of 40 nm. When the work wavelength is 13.9 nm, the product of the zero order and the first order light diffractions is close to 8.1% at an incident angle of 81.2°, and the diffraction efficiendes of the zero order and the first order are approximately equal. Experimental results illustrate the potential of Laminar grating as a beam splitter at 13.9 nm and also show its efficiency can be higher than 7 %.

关 键 词：软X射线 分束光栅 衍射光栅 干涉仪 

分 类 号：O436.1[机械工程—光学工程] TH744.3[理学—光学]