基于CCD成像的轴承滚柱表面缺陷智能检测的研究  

The Research of the Defective Detection System of Surface of Roller Bearing on the Basis of CCD Imaging

作　　者：蔡善乐[1] 刘桂兰[1] 杨松彬[1] 

机构地区：[1]兰州理工大学机电工程学院

出　　处：《机电一体化》2009年第2期68-69,72,共3页Mechatronics

摘　　要：提出了一种基于CCD成像的轴承滚柱表面缺陷非接触检测技术。CCD将目标转换为视频信号并输送到图像采集卡，图像采集卡对视频信号进行解析、数字化后输送给专用的图像处理系统，对图像进行处理，再用LabVIEW软件编程。In this paper the author given a non-contact roller bearings surface defects detection system which based on CCD imaging. CCD converts target to the video signal and transmits to the image acquisition cards, the image acquisition card process video signal analytical,digital and transmit the signal to the special image processing system. Processing image pretreatment, and then programming by LabVIEW software.

关 键 词：CCD 轴承滚柱 表面缺陷 LABVIEW 

分 类 号：TH133.3[机械工程—机械制造及自动化]