低真空封装的新型变电容面积MEMS惯性传感器阶跃响应特性分析  

Study of Inertial Step Response of a Novel MEMS Capacitive Accelerometer with Variable Areas in Low Vacuum

作　　者：陈金丹[1] 董林玺[1] 颜海霞 霍卫红[1] 李永杰[1] 孙玲玲[1] 

机构地区：[1]杭州电子科技大学射频电路与系统教育部重点实验室,杭州310018 [2]东芝水电设备有限公司,杭州311504

出　　处：《传感技术学报》2009年第3期331-336,共6页Chinese Journal of Sensors and Actuators

基　　金：国家自然科学基金资助项目(60506015);浙江省自然科学基金资助项目(Y107105)

摘　　要：一种新型变电容面积MEMS惯性传感器与传统的梳齿电容传感器相比,具有对梳齿电容不平行敏感度低,可加测试电压高等优点。通过对该传感器在低真空封装条件下的惯性阶跃响应特性分析,着重研究了不同梳齿电容倾斜角度对该传感器的阶跃惯性信号响应的影响,以及不同倾斜角度梳齿的位移响应和测试电压、空气真空度的关系,并把该结果和梳齿结构的情况进行比较。结果表明,工艺因素对变电容面积MEMS惯性传感器在低真空封装下的阶跃惯性响应影响很小;另外,该结构上可加的测试电压可以是梳齿电容结构上可加测试电压的近10倍,这有利于减小接口电路的噪声。以上分析论证了该新型传感器有利于降低器件的工艺要求和提高传感器的分辨率。A new kind of MEMS capacitive inertial sensor with variable overlapping area is insensible with the non-parallel of the combs and can work under a much larger testing voltage compared with traditional comb capacitive sensor. An inertial step response of MEMS area changed capacitive aecelerometer with non-parallel combs is analyzed considering the air damping in low vacuum, and the relation between the testing voltage and the displacement response of the sensor with different angles between the combs and the effects of different air pressure to displacement response are also analyzed. The results are compared with the one of the comb capacitive sensor. It shows that the effects of non-parallel comb on the MEMS capacitive sensors with the variable overlapping area are much smaller. In addition, the designed structure can work under a very large testing voltage which is nearly ten times larger then the one of capacitive sensor with the variable distance, which is very useful for reducing the noise of the interface circuit. It is concluded that the new kind sensor is insensible with the technology errors and can improve the resolution of MEMS capacitive sensor.

关 键 词：MEMS 高精度微传感器 阶跃响应分析 倾斜梳齿 

分 类 号：TH824[机械工程—仪器科学与技术] P212.12[机械工程—精密仪器及机械]