活塞泵对造纸污泥吸入特性实验研究  

Experimental Research on Paper Sludge Suction Characteristic of the Piston Pump

作　　者：郭光明[1] 马星民[1,2] 赵巧芝[1,3] 吴淼[1] 

机构地区：[1]中国矿业大学(北京)机电学院,北京100083 [2]北京中矿机电工程技术研究所,北京100083 [3]《煤炭工程》杂志社,北京100011

出　　处：《中国造纸》2009年第4期57-60,共4页China Pulp & Paper

基　　金：科技部科技型企业技术创新基金项目(02C26211100499);教育部高等学校博士点基金项目(20020290011)。

摘　　要：采用自行研制的高浓黏稠物料吸入特性测试装置,研究了不同质量分数的造纸污泥、吸料速度、料缸长径比对吸入容积效率的影响及影响规律。实验中造纸污泥质量分数分别为42.2%、41.5%、39.4%、36.8%、32.4%、30.4%,吸料速度分别为0.23、0.18、0.13、0.10、0.08 m/s,料缸长径比分别为1.875、2.500、3.125、3.750、4.375、5.000、5.625。结果表明,随着造纸污泥质量分数的增加,吸入容积效率逐渐减小;在吸料速度不大于0.23 m/s的条件下,随着吸料速度的增加,吸入容积效率随之增加;随着料缸长径比的变化,吸入容积效率几乎保持不变。The suction volumetric efficiency of the piston pump used for paper mill sludge handling was studied by changing the parameters, such as sludge concentration, slenderness ratio of suction cylinder, running speed of hydraulic cylinder, etc. In the experiment, the concen- trations of paper mill sludge were prepared as 42. 2%, 41.5%, 39.4%, 36. 8%, 32. 4% and 30. 4% ; the running speeds were 0. 23 m/s, 0. 18 m/s, 0. 13 m/s, 0. 10 m/s, and 0. 08 m/s; and the slenderness ratios of suction cylinder were 1. 875, 2. 500, 3. 125, 3. 750, 4. 375, 5. 000and 5. 625. The results showed that the suction volumetric efficiency decreases gradually with the increase of sludge concentration. When the running speed of hydraulic cylinder is less than or equals to 0.23 m/s, the suction volumetric efficiency increases with the increase of running speed. With the change of the slenderness ratio of suction cylinder, the suction volumetric efficiency is unchanged

关 键 词：吸入容积效率 造纸污泥质量分数 吸料速度 料缸长径比 

分 类 号：X793[环境科学与工程—环境工程]