检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:孔戈[1,2] 周健[3] 王绍博[4] 张姣[1]
机构地区:[1]同济大学交通运输工程学院,上海200092 [2]上海浦东新区建设工程技术监督有限公司,上海201209 [3]同济大学地下建筑与工程系,上海200092 [4]上海市地震局,上海200062
出 处:《地震工程与工程振动》2009年第3期101-107,共7页Earthquake Engineering and Engineering Dynamics
基 金:地震科学基金资助项目(A08045)
摘 要:联络通道与盾构隧道的连接处是隧道抗震的薄弱环节,但目前有关联络通道抗震性能的研究开展得还很少。对于隧道与联络通道连接部位这类典型的空间结构,三维动力有限元分析是最为有效的方法,而其中的人工边界条件和地震动输入方法是实现这一方法的关键技术之一。本文以显式形式将多次透射边界条件引入三维动力分析控制方程,采用分割算法分别求解边界节点和内部节点的响应,然后以对武汉长江隧道工程为背景,利用这种算法研究了隧道与联络通道连接处的地震响应规律,并对采用柔性搭接代替刚性接头和地基加固两种措施的减振效果进行了计算分析。The joints between the connectional whereas little correlative research has been done passages and the shield tunnels are weak links in so far. The most effective approach for such typical earthquake, spatial structure is to simulate the whole soil-structure interaction system by finite element method. In this thesis, we introduced the multi-transmitting boundary into the dynamic governing equation with an explicit form and presented a partitioned solution procedure, which solved the responses of boundary nodes and inner nodes in a decoupled way. Then, this approach was applied to research the seismic responses of a connectional passage for a shield tunnel, with emphasis on the effect of two kinds of vibration reduction measure ( 1 ) substituting flexible joints for rigid joint of the connectional passage and (2 strengthening the soft soil foundation around the structure, and some valuable conclusions were drawn in the end.
关 键 词:盾构隧道 联络通道 多次透射边界 接头 抗震性能
分 类 号:TD853.34[矿业工程—金属矿开采]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.148.167.99