Ti-B_4C-蔗糖系团聚粉制备工艺研究  

Study on Preparation Technology of the Ti-B_4C-Sucrose Agglomerate Powders

作　　者：李伟波[1] 张长江[1] 李舒[1] 

机构地区：[1]装备指挥技术学院士官系,北京102249

出　　处：《科学技术与工程》2009年第14期4219-4222,共4页Science Technology and Engineering

摘　　要：利用蔗糖作为碳的前驱体能够成功制得Ti-B4C-C三元团聚粉。通过分析可知在Ti-B4C-蔗糖系团聚粉制备过程中最关键一步是碳化。对比不同工艺团聚粉及所得涂层成分确定蔗糖作为碳的前驱体制备Ti-B4C-C三元团聚粉的最佳工艺。Using sucrose as raw material of C, the Ti-B4C-C agglomerate powders for reactive spray were prepared. By analysis, carbonization was the most important factor in the process of preparation of Ti-B4C-Sucrose system agglomerate powders. By experiment, the optimum process is fixed about sucrose as raw material of C, the Ti- B4C-C agglomerate powders.

关 键 词：Ti-B4C-蔗糖系团聚粉 碳化 制备工艺 

分 类 号：TS245.1[轻工技术与工程—制糖工程]