基于DMD微光刻的导光板模板的制作方法  

Method of fabricating light guide plate template based on DMD micro-lithography

作　　者：李晓建[1] 朱冀梁[1] 申溯[1] 周小红[1] 陈林森[1] 

机构地区：[1]苏州大学信息光学工程研究所,江苏苏州2156006

出　　处：《应用光学》2009年第4期669-673,共5页Journal of Applied Optics

基　　金：国家自然科学基金(60777039)

摘　　要：提出了一种基于数字微反射镜(DMD)微光刻的导光模板的制作方法。导光板的网点单元图形由DMD输入,经过缩微光学成像系统缩微后,在光刻胶干板上逐单元网点曝光,再经过显影、微电铸得到导光板模板,在PC薄板材上用微纳米压印制成导光板,厚度仅为0.381 mm。采用自行研制的SVGwriting-DMD激光直写系统,图形的最小分辨率为2μm,DMD微光刻法无需掩膜版,可实现不同形状、大小、微结构的单元网点图形及网点的排布,便于大幅面的导光板模板的制作。A flexible and efficient solution for fabricating the ultra-thin hght guided prates （LGP） is presented. The approach is based on maskless lithography which is realized by the aid of a digital micro-mirror device （DMD）. The image of microstructures created by DMD is projected by passing through a projection optical system to the substrate with a photoresist layer. After exposure, development and electroforming, a nickel template with patterned microstructures is obtained and can be used to fabricate LGP by hot embossing. The proposed method has the advantages of arbitrary microstructures created by DMD lithography and costeffective mass production by embossing replication. A fabricated LGP with thickness down to 0. 381 mm was demonstrated, in which the microstructures have the resolution of 2 μm. The process provides a effective scheme for fabricating large format LGP with more complex microstructures.

关 键 词：激光直写 数字微反射镜 导光板 微光刻制 

分 类 号：TN249[电子电信—物理电子学] TN27