铸造法制备TiC/ZA43复合材料的试验研究  

Test Research on Fabrication of TiC/ZA43 Composite by Casting Technique

作　　者：刘金水[1] 肖汉宁[1] 舒震[1] 蒋冰[1] 项品峰[1] 叶久新[1] 

机构地区：[1]湖南大学

出　　处：《特种铸造及有色合金》1998年第3期24-26,共3页Special Casting & Nonferrous Alloys

基　　金：机械工业部资助

摘　　要：以Ｔｉ，Ａｌ，Ｃ粉末为原料，采用ＸＤ法与铸造法相结合的工艺制备了体积分数为５％的ＴｉＣ／ＺＡ４３复合材料，研究了ＴｉＣ／ＺＡ４３复合材料的铸态组织以及增强相ＴｉＣ颗粒的尺寸与分布。试验结果表明：ＴｉＣ在复合材料中具有良好的稳定性，且随着Ａｌ－ＴｉＣ预制块加入温度的提高，颗粒分布更加均匀，晶粒细化效果更为显著。5%TiC/ZA43 composites were prepared with Ti, Al, C powder by combining the advantages of both XD and casting techniques. The ascast microstructures of TiC/ZA43 composite as well as the size and distribution of TiC particulate rinforcement phase were studied. It was found that TiC particulate in composite exhibited excellent stability, the distribution of TiC particulate in matrix became more homogeneous and the microstructures became finer with increase of the prepared AlTiC addition temperature.

关 键 词：铸造 复合材料 锌合金 碳化硅 

分 类 号：TB333[一般工业技术—材料科学与工程] TG2[金属学及工艺—铸造]