蔺家坝灯泡贯流泵机组水力性能及结构分析  

Analysis of hydraulic performance and structure for Linjiaba Bulb Tubular Pump Set

作　　者：秦钟建 伍杰[1] 张仁田[2] 

机构地区：[1]中水淮河规划设计研究有限公司,安徽蚌埠233001 [2]江苏省水利勘测设计研究院有限公司,江苏扬州225009

出　　处：《排灌机械》2009年第3期177-180,共4页Drainage and Irrigation Machinery

基　　金：国家科技支撑计划重大项目(2006BAB04A03)

摘　　要：蔺家坝泵站作为我国首座采用齿轮箱传动的大型灯泡贯流泵机组的泵站,为使水泵装置具有较优的水力性能,采用CFD仿真技术对该灯泡贯流泵机组的流道进行了优化设计和计算,并与水泵装置模型试验结果进行了比较;重点分析了灯泡体的支撑结构、叶片调角机构、主轴密封装置、轴承布置、齿轮箱及同步电动机等主要设备的结构设计.结果表明:CFD仿真技术应用于灯泡贯流泵机组的水力性能优化是可行的,蔺家坝泵站采用大型灯泡贯流泵机组,在设计净扬程2.4 m工况下,水泵装置效率达到78%,且气蚀性能良好,技术参数均达到了南水北调东线工程的要求;大型齿联传动灯泡贯流泵机组的成功运行,为国内其他大流量低扬程泵站的机组选型、设计及制造提供了可借鉴的经验.Linjiaba Pump Station is the first station which adopts large-scale gear-driven bulb tubular pump set. In order to obtain optimum hydraulic performance of the pump set, its hydraulic loss was calculated by Computational Fluid Dynamics （CFD） , and the results were compared with the model pump set test. The structures of bulb tubular pump supports, vane angle adjustment, main shaft seal apparatus, bearing arrangement, gearbox and synchronous motor were analyzed. The conclusion indicates that, the testing efficiency of the model pump set is 78%, the cavitation characteristic is fine at the net head（2.4 m） of pump station, and its hydraulic performances reach the index of the eastern route project of the South - to - North Water Diversion. The application of large-scale gear-driven bulb tubular pump set provides reference for type selection, design and manufacture of other pump stations of low lift and large flow capacity.

关 键 词：泵站 灯泡贯流泵 齿轮箱 水力性能 结构 

分 类 号：TV68[水利工程—水利水电工程]