不同转子的双转子连续混炼机混炼效果的比较  

Mixing Effect of Twin-rotor Continuous Mixer with Different Rotors

作　　者：张海燕[1] 何雪涛[1] 杨卫民[1] 丁玉梅[1] 

机构地区：[1]北京化工大学机电学院,北京100029

出　　处：《中国塑料》2009年第7期96-100,共5页China Plastics

基　　金：北京市自然科学基金项目(3062015)

摘　　要：采用三维绘图软件Pro/E对双转子连续混炼机的转子进行了结构设计,利用GAMBIT对其进行网格划分及边界条件设定,并运用有限元流体分析软件POLYFLOW对转子部分的混炼过程进行了模拟分析,比较了3种转子转过不同角度时沿轴向距离的剪切速率、平均速度、黏度以及压力。结果表明,螺棱交汇点位置在其长度方向1/3处的转子存在着很明显的反向压力,且剪切速率和平均速度都有所提高,即可以产生明显的有利于混炼的反向流动。In this study, the rotor structure of twin-rotor continuous mixer was designed using Pro/ Engineer software. The meshing and the setting of boundary conditions were made by the GAMBIT. The mixing processes with three different rotors were simulated by POLYFOW, and the shear rate, the average velocity, the viscosity and the pressure in the axial direction were compared when the rotors rotate to different angles. Finally, it was found that an obvious back pressure was present on the rotor whose meeting point of the screw flight was at its 1/3 length position, where the higher shear rate and average velocity inhibited the counter flow of the mixing.

关 键 词：双转子连续混炼机 剪切速率 平均速度 黏度 压力 

分 类 号：TQ315[化学工程—高聚物工业]