检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]厦门大学物理与机电工程学院,福建厦门361005
出 处:《厦门大学学报(自然科学版)》2009年第5期648-650,共3页Journal of Xiamen University:Natural Science
基 金:教育部留学回国基金(0030K13016)资助
摘 要:用电子束蒸发技术在玻璃衬底上制备氧化铟锡薄膜,并在500℃下氮气氛围中退火1h.将退火后的薄膜用光刻技术形成一个M型规则线图,并记录连续4轮由室温升至400℃,接着降至室温过程中样品的电阻变化.测量数据显示,电阻温度曲线在温度上升和下降阶段存在滞后现象.结合半导体载流子输运理论建立模型,与降温实验数据拟合程度很好,但当用来解释升温数据时却存在明显的偏差.由降温过程的数据计算得到氧化铟锡的电阻温度系数在温度大于380℃后趋于+1.393×10-3/℃,同时给出了氧化铟锡薄膜的激活能.Indium tin oxide thin films on K9 glass substrates were prepared by ion-assisted electron beam evaporation technique and then annealed in N2 atmosphere under 500℃ for 1 hour. The resistance of a patterned sample was measured in the range of room temperature to 400℃, forwards and backwards, for four consecutive cycles. The measurement results showed that there exists hysteresis in the forward and backward curves. According to the semiconductor carrier transport theory,a model was introduced to fit the backward curve with good results. However,this model didn't work well with the forward curve. The temperature coefficient of resistance calculated from the measurement results is +1.393×10^-3/℃ when temperature is above 380℃. And the activation energy of the film is also obtained.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.42