一种多功能气动抱夹装置的参数化设计及运动仿真研究  

Parameterization Design and Kinematics Simulation of a Multi-purpose Pneumatic Clamp Equipment

作　　者：李一民[1] 

机构地区：[1]南京信息职业技术学院,南京210046

出　　处：《包装工程》2009年第10期21-24,共4页Packaging Engineering

基　　金：江苏省自然科学基金(BK200606060)

摘　　要：阐述了UG平台下气动抱夹装置的虚拟设计与仿真分析方法,在UG软件中利用参数化建模、虚拟装配功能建立了气动抱夹装置的三维实体模型。对气动抱夹装置进行了运动仿真分析,根据仿真结果对左右吸盘支架与滑动板之间的滑轨进行调整,使抱夹行程由64 mm增加到80 mm,实际应用过程中的抱夹行程为78 mm,运行效果良好,证明仿真分析方法合理可行。Method for virtual design and simulation analysis of pneumatic clamp equipment on UG platform was elaborated. Three dimensional model of pneumatic clamp equipment was created with parametric modeling and virtual assembly functions of UG software. Then kinematics simulation of pneumat ic clamp equipment was carried out. Adjustments were made to the slide rail between the vacuum chuck brackets on right and-left sides and sliding plate from 64mm to 80mm according to the simulation result. The real slide rail is 78mm, which proves that the method of simulation and analysis is feasible.

关 键 词：气动抱夹装置 参数化设计 虚拟装配 运动仿真 

分 类 号：TB486[一般工业技术—包装工程] TH122[机械工程—机械设计及理论]