新型煤气化炉制备富含CO燃气及载能材料研究  

PREPARATION OF FUEL GAS RICH IN CO AND ENERGY CARRIER MATERIAL BY NEW COAL GASIFICATION FURNACE

作　　者：王爱民[1] 白妮[1] 王晓刚[2] 

机构地区：[1]榆林学院化学与化工学院,陕西榆林硕士讲师719000 [2]西安科技大学材料科学与工程学院,西安博士生导师教授710054

出　　处：《煤炭转化》2009年第4期34-38,共5页Coal Conversion

基　　金：国家自然科学基金资助项目(50174046);宁夏自治区科技攻关项目

摘　　要：为了实现煤炭的高效洁净转化,利用自行发明的电热还原煤气化炉,以煤和石英砂为原料制备大量富含CO的燃气,同时伴生高附加值的载能材料,研究了煤种和气化工艺对燃气的组成及酸碱性的影响,并用XRD和SEM对载能材料进行测试.结果表明,燃气中以CO气体为主,平均含量可达70%,CO+H2平均含量达85%,CO+H2+CH4平均含量达90%,使用无烟煤、烟煤焦炭或焙烧料法可提高燃气中CO气体的含量.载能材料是SiC,含量为98.45%,其中3C-SiC占4.12%,6H-SiC占89.81%,4H-SiC占4.42%,晶体的自形程度也比较高,多为厚板状结晶.Self-inventing multi-heat silicon carbide furnace is used in order to convert coal high-efficiently and cleanly, in which much fuel gas rich in CO is produced by using raw materials of coal and quartz. Meanwhile, high added value material is being produced. We not only study the influence of coal and gasification technology on gas products, but also test energy carrier ma- terial through XRD and SEM. The results show that fuel gas is mainly composed of carbon monoxide （CO）, the average content of CO reaches up to 70%, the average content of the COd-Hz and COd- Hzd-CH4 reach to 85% and 90% respectively. We can improve the content of CO by using an- thracite, coke or roasting method. The energy carrier material SiC （content of 98.45%） is ob- tained, among which the yields of 3C-SiC, 6H-SiC, 4H-SiC are 4. 12%, 89.81% and 4.42% respec- tively. The crystal has a relatively high euhedrat degree, most of which is thickly platelike crys- tal.

关 键 词：煤气化炉 一氧化碳 碳化硅 载能材料 

分 类 号：TQ545[化学工程—煤化学工程] TQ127.12