直插式自动嫁接机控制系统的设计  

Design of control system to direct insert type automatic grafting machine

作　　者：项伟灿[1] 张路[1] 武传宇[1] 李建平[2] 

机构地区：[1]浙江理工大学机械与自动控制学院,浙江杭州310018 [2]浙江大学生物系统工程与食品科学学院,浙江杭州310029

出　　处：《机电工程》2009年第10期52-53,61,共3页Journal of Mechanical & Electrical Engineering

基　　金：浙江省重大科技专项资助项目(N20080437)

摘　　要：为了实现直插式自动嫁接机稳定、高效地运行,首先,根据自动嫁接机的机械结构和工作原理确定了可编程控制器(PLC)的I/O表,并由I/O口的数量选择PLC的型号;然后,根据需要绘制了气动回路图,最后,通过GX-Developer进行了软件编程。研究结果表明,嫁接机的各项指标均已经达到设计要求,并且运行可靠。In order to realize the steadily and efficiently run of direct insert type grafting machine,firstly,the I/O table was made based on the mechanical structure and work principle of the grafting machine,the type of programmable logic controller（PLC） was chosen according to the numbers of I/O.And then a pneumatic circuit was drawn by requirements.Finally,this system was programmed by GX-Developer.The results indicate that all indexes can meet the design requirements and the grafting machine can run steadily.

关 键 词：自动嫁接机 可编程逻辑控制器 气动 

分 类 号：TP273[自动化与计算机技术—检测技术与自动化装置]