工业测量系统在矿井十字中线恢复中的应用  

Application of industrial measuring system on the restoration of cross line through shaft center

作　　者：杨书大[1] 卢秀山[1] 谷守周[1,2] 畅学民 

机构地区：[1]山东科技大学测绘科学与工程学院,山东青岛266510 [2]中国测绘科学研究院,北京100039 [3]北京市大兴区房地产测绘所,北京102600

出　　处：《矿山测量》2010年第1期68-71,共4页Mine Surveying

摘　　要：工业测量系统具有非接触观测的优点,在许多危险性大的实际问题中得到了广泛应用,相比常规接触测量难度小,在一定程度上减少了人为误差。文中介绍了在某煤矿事故的实际问题中运用工业测量系统通过矿区控制网的重新建立,井中确定,绞车中心及绞车主轴测定等工作恢复矿井十字中线的情况,说明了工业测量系统在恢复矿井十字中线应用上的可行性。Industrial measuring system could observe objects without touching. It is used widely in many problems which are very dangerous. Comparing to the usual measurement industrial measuring system is easier and reduces the man-made errors. This paper introduces how to use industrial measuring system to restore the cross line through shaft center on the actual problems. The main works contains the reinstitution of control net in mining area, the determination of shaft center, the determination of center of winch and principle axis of winch. This paper illustrates the feasibility of the application of industrial measuring system on the restoration of cross line through shat center.

关 键 词：工业测量系统 矿井十字中线 Axyz 

分 类 号：TD175[矿业工程—矿山地质测量]