两种材料对异型气雾罐胀形的影响  

The effect of different materials on the pneumatic bulging of aerosol pot with special form

作　　者：崔树平[1] 宋志平[1] 黄特 崔涵[3] 

机构地区：[1]山西机电职业技术学院,长治046011 [2]永康市职业学校,永康321300 [3]中北大学,太原030051

出　　处：《塑性工程学报》2010年第1期78-81,共4页Journal of Plasticity Engineering

摘　　要：为提高异型金属气雾罐气压胀形的成形质量,减少壁厚减薄严重及皱折破裂等成形缺陷,采用数值模拟方法,对比分析T3镀锡钢和3A21铝两种材料对异型气雾罐气压胀形的影响,研究结果为合理选用罐坯材料提供依据。To enhance the quality of the special aerosol pot formed by pneumatic bulging and reduce the forming defects including serious thickness thinning, wrinkling and bursting, numerical simulation method was introduced to compare and analyze the effect of T3 tinned steel and 3A21 aluminum on the pneumatic bulging of the aerosol pot. The results provide the basis to select material for the aerosol pot.

关 键 词：异型气雾罐 材料 数值模拟 

分 类 号：V261.74[航空宇航科学与技术—航空宇航制造工程]