硅集成爆炸箔组件起爆HNS-IV试验研究  

The Test Research on the Initiation of HNS-IV by An Integrated Silicon Exploding Foil Assembly

作　　者：郭菲[1] 施志贵[2] 蒋小华[1] 何碧[1] 付秋菠[1] 

机构地区：[1]中国工程物理研究院化工材料研究所,四川绵阳621900 [2]中国工程物理研究院电子工程研究所,四川绵阳621900

出　　处：《火工品》2009年第6期5-7,共3页Initiators & Pyrotechnics

基　　金：中国工程物理研究院重大预研项目(ZD2007)

摘　　要：基于MEMS加工技术,设计制造了一种以硅为基底的集成爆炸箔组件。利用该爆炸箔组件,进行了起爆HNS-IV炸药的试验研究。结果表明,设计制造的爆炸箔组件参数合理,在3.5kA电流条件下可以起爆HNS-IV炸药。This paper described the preliminary research on the slapper detonator which principally utilized the MEMS technology and process. And an exploding foil assembly based on the Si MEMS process was manufactured. This kind of exploding foil assembly has been used in the test of initiating the HNS-IV. The results of the test shows that the design of this kind of exploding foil assembly is feasible and the exploding foil assembly can successfully initiate the HNS-IV under 3.5A current condition.

关 键 词：MEMS 冲击片雷管 爆炸箔组件 起爆 

分 类 号：TQ565.2[化学工程—炸药化工]