薄型中密度纤维板过压缩工艺研究  

Over-pressing technology of thin medium density fiberboard

作　　者：杜官本[1] 王思群[2] 雷洪[1] 

机构地区：[1]西南林学院,西南山地森林资源保育与利用省部共建教育部重点实验室 [2]田纳西大学林产品中心

出　　处：《北京林业大学学报》2010年第1期114-117,共4页Journal of Beijing Forestry University

基　　金："948"国家林业局引进项目(2006-4-111);教育部新世纪优秀人才支持计划(NCET-06-0825);云南省应用基础研究重点项目(2008CC014)

摘　　要：为研究过压缩工艺对板坯内部温度和蒸汽压的影响,在实验室条件下制备了薄型中密度纤维板,考察了过压缩工艺参数(过压缩程度、过压缩时间、闭合时间、热压温度以及压板从过压缩位置返回的时间)对板材物理力学性能的影响。结果表明:压板从过压缩位置返回的过程中,板坯心层蒸汽压显著下降,过压缩工艺增大了中密度纤维板表心层密度差;与常规热压工艺相比,采用过压缩工艺可以提高薄型中密度纤维板的物理力学性能。Thin medium density fiberboard （MDF） was prepared in laboratory,and the core temperature and steam pressure were monitored. The effects of some factors on the mechanical performance of thin MDF were evaluated. These factors included degree of over-pressing,holding time,closing time of press,pressing temperature,returning time from over-pressing position to final thickness. The gas pressure in mats during pressing was recorded and panel performance was evaluated. A remarkable steam pressure decrease was found when press plate went back to the final position from the over-pressing position. Over-pressing process resulted in a higher surface density. Compared with conventional pressing procedure,the physico-mechanical performance of thin MDF was improved by over-pressing technology.

关 键 词：过压缩 薄型中密度纤维板 物理力学性能 

分 类 号：TS653.6[轻工技术与工程]