采样点选择对动态汽车衡称量精度的影响  被引量:4

Influence of Sampling Points on the Precision of Weigh-in-Motion

在线阅读下载全文

作  者:李丽宏[1] 裴春清[1] 刘军[1] 谢克明[1] 

机构地区:[1]太原理工大学信息工程学院,山西太原030024

出  处:《中北大学学报(自然科学版)》2010年第1期19-22,共4页Journal of North University of China(Natural Science Edition)

基  金:国家高技术产业化专项资助项目(2004-2307);国家火炬计划资助项目(2007GH040015)

摘  要:为了提高动态称重的精度,提出一种选取有效采样点减小误差的方式.该方式选用有限冲击响应数字滤波的方法设计数字滤波器,并利用Matlab软件进行了仿真.经过滤波后的采样信号,将重量信号大于3Hz以上的全部滤去,消除了汽车经过秤台时的各种干扰信号;保留有用的汽车轴重信号,准确提取出有效数据称量段;再采用3σ准则去除粗大误差,对去除粗大误差后的数据求和,然后取平均值作为经过秤台的汽车轴重测量值.对实验结果的分析表明:通过选取有效采样点,可使动态汽车衡在50%载荷时的称量精度提高到1%以内.In order to improve the accuracy of weigh-in-motion, the effective way of selecting sampling points is presented to reduce error. A digital filter is designed with FIR and simulated with Matlab software. After filtering, the weight signals higher than 3 Hz and all kinds of disturbing signals are eliminated when the car passing through the scales, and then the effective data are picked up accurately. The criterion of 3 standard deviation is used to remove gross errors, and then the data are averaged as the measured weigh-in-motion value. The experimental results show that, by choosing the effective sampling points, the accuracy of dynamic automotive value at 50% load can reach 1%.

关 键 词:有限冲击响应窗函数 有效采样点 3σ准则 有效数据段 

分 类 号:TP273[自动化与计算机技术—检测技术与自动化装置]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象