水热法制备质子交换膜燃料电池阴极Pt/C催化剂  

Pt/C catalyst prepared by hydrothermal method for PEMFC

作　　者：温恒[1] 秦怡红[1] 李文良 

机构地区：[1]中南大学冶金科学与工程学院,湖南长沙410083 [2]深圳市豪鹏科技有限公司,广东深圳518111

出　　处：《电源技术》2010年第2期157-159,共3页Chinese Journal of Power Sources

摘　　要：采用硫代乙酰胺(TAA)为沉淀剂,水热法合成40%Pt/C质子交换膜燃料电池阴极催化剂,通过X射线衍射(XRD)和透射电镜(TEM)考察了Pt/C催化剂的物理性能,并利用循环伏安法(CV)分析了催化剂的电化学活性,采用旋转圆盘电极(RDE)评价了催化剂的氧还原催化活性。实验表明水热硫化物沉淀法合成催化剂受反应pH值、氯铂酸与沉淀剂硫代乙酰胺的配比、H2热处理等制备条件的影响,制得的Pt/C催化剂粒径小(平均粒径3nm左右)并且分布均匀,催化性能较好。40% Pt/C electrocatalysts for PEMFC were prepared by hydrothermal method with thioacetamide（TAA） as precipitator, the physical performance of Pt/C catalysts were characterized by TEM, and XRD, the electrochemical activity of the catalyst were analyzed by cyclic voltammetry（CV）, and the activity towards oxygen electro reduction was studied with the rotating disk electrode （RDE）. The test results show that Pt/C catalysts are affected by preparation conditions, such as pH in the solution, the atom ratio of chloroplatinic acid to TAA, and the heat-treatment under H2 reduction. The prepared Pt/C electrocatalysts have small particle size with even distribution and high electrocatalytic activity.

关 键 词：质子交换膜燃料电池 PT/C催化剂 水热法 硫代乙酰胺 氧还原反应 

分 类 号：TM911.4[电气工程—电力电子与电力传动]