配用转炉渣烧结生产实践  

Sintering Production by proportioning of Converter Slag

作　　者：武轶[1] 金俊[1] 夏征宇[1] 

机构地区：[1]马鞍山钢铁股份有限公司技术中心,安徽马鞍山243000

出　　处：《钢铁研究》2010年第2期21-23,共3页Research on Iron and Steel

摘　　要：马钢遵循循环经济的理念,将四钢轧转炉渣作为熔剂加入烧结,合理地循环利用。烧结生产实践表明,配用四钢轧转炉渣后,烧结利用系数略有提高,烧结矿固体燃耗呈下降趋势,转鼓强度略有降低,烧结矿中磷质量分数有所增加。配用转炉渣可降低烧结原料成本,具有良好的经济效益、资源与环境效益。Following the concept of recycle economy,converter slag recovered from No.4 Steelmaking and Rolling Plant of Maanshan Steel was proportioned into sinter charge as a sintering flux.The results showed that sintering productivity increased slightly and fuel rate trended down.In addition,Tumbler Index decreased slightly and phosphorus content increased to a small extent.Thanks to the decrease of raw material cost,good economic benefit,resource reuse and environment improvement were achieved.

关 键 词：转炉渣 烧结生产 经济效益 

分 类 号：TF124.5[冶金工程—粉末冶金]