Mn含量对贝氏体抗磨钢组织和性能的影响  

Effect of Mn Content on Microstructure and Properties of Banitic Wear-resistant Steel

作　　者：张惠惠[1] 唐建新[1] 

机构地区：[1]四川大学制造科学与工程学院材料成型及控制工程系,四川成都610065

出　　处：《热加工工艺》2010年第8期49-51,共3页Hot Working Technology

摘　　要：为找出耐磨性韧性配合优良的Mn的成分,从而获得以下贝氏体为主的抗磨钢,研究了合金元素Mn对低合金贝氏体抗磨钢组织和性能的影响。结果表明,实验材料在铸态下就获得了下贝氏体组织,经过热处理后,组织更细小均匀。并且随Mn含量的增加,硬度上升,冲击韧度下降,且在2.8%Mn处取得强韧性配合优良的最佳值。To research Mn content with excellent wear ability and toughness, which obtains the steel with stable banitic matrix, the effects of Mn content on microstructure and mechanical properties of low alloy wear-resistant cast steel were studied. The results show that the as-cast microstructure is low bainite. After austenitizing and air-cooling,compared with the as-cast microstructure, the microstructure of the sample is finer and more homogeneous. the more Mn in steel, the higher the hardness, the lower the impact toughness, and the performance is best when Mn content is about 2.8%.

关 键 词：贝氏体 锰含量 组织和性能 强韧性 

分 类 号：TG142.13[一般工业技术—材料科学与工程]