检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:赵利平[1,2] 刘凤德[1,2] 王薇 夏先丽 文广[4] 李健[1,2]
机构地区:[1]中国测绘科学研究院,北京100039 [2]北京四维远见信息技术有限公司,北京100039 [3]民政部国家减灾中心,北京100053 [4]云南省航测遥感信息院,昆明650034
出 处:《遥感信息》2010年第3期82-87,共6页Remote Sensing Information
基 金:国家自然科学基金(40901178);地理空间信息工程国家测绘局重点实验室项目(200924);地理空间信息工程国家测绘局重点实验室项目(200925);云南省测绘局科技项目
摘 要:简要给出了WorldView-1卫星及传感器的有关性能参数,详细论述了可用于WorldView-1影像数据几何处理的多种RFM(Rational Function Model)多项式平差模型。然后,使用云南地区的WorldView-1影像数据进行了有关试验研究,分别采用九种零阶、一阶和二阶多项式平差模型,在像方改正RFM参数的系统误差。结果表明,当地面控制点在精度、数量与分布等方面质量较好时,各种模型精度基本一致,平面精度可达到1.6个像素(0.9m)左右。此外,本文重点研究了在控制点质量较低的情况下,各种RFM多项式平差模型的改正精度。发现随着控制质量的降低,二阶多项式和一阶多项式改正的精度有显著下降,但零阶多项式改正的精度基本稳定不变。因此,本文认为零阶多项式模型,即平移模型,是一种最简单、适应性最好、精度最高的用于处理WorldView-1影像数据的平差模型。In this paper,the specifications of WorldView-1 and its payloads are introduced,and nine polynomial adjustment models(from zero order to second order) used to improve the vendor provided RFM(Rational Function Model) accuracy are discussed in detail.WorldView-1 images in Yunnan Province are used to test the correction accuracy of these adjustment models using 81 GPS points.Results show that the accuracy of nine modes is similar when using well distributed GCPs with high accuracy and the planar RMS errors can reach 1.6 pixels(0.9 meter).The correction accuracy of polynomial RFM adjustment models using sparse,badly-distributed,or low accuracy GCPs is studied emphatically in this paper.Research results show that with the degradation of GCPs accuracy,the errors of Independent Check Points(ICPs),using zero order polynomial adjustment model,remain stable,but that of one order and two order polynomial adjustment models degrade distinctly.In conclusion,the zero-order polynomial RFM adjustment is the simplest,most adaptive and has highest accuracy for WorldView-1 image,and it is recommended for the difficult area mapping with sparse or badly-distributed GCPs.
关 键 词:高分辨率 WorldView-1 有理函数模型 RFM 多项式 精度
分 类 号:TP79[自动化与计算机技术—检测技术与自动化装置]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15