摩托车轮胎模态参数实测研究  

Experimental investigation on mode parameters of motorcycle tire

作　　者：张尚先[1] 程国飞[1] 王建生[2] 康献民 

机构地区：[1]中山火炬职业技术学院,广东中山528436 [2]五邑大学,广东江门529020 [3]江门市特种摩托车工程技术中心,广东江门529020

出　　处：《橡胶工业》2010年第6期350-353,共4页China Rubber Industry

基　　金：广东省科技计划项目(2005B10201013)

摘　　要：采用摩托车轮胎模态测试系统,通过时域和频域相结合的方法提取摩托车轮胎模态参数,并将测试结果与轿车轮胎进行对比。结果表明,摩托车轮胎的第1阶固有频率高于轿车轮胎;径向激振的各阶模态振型形状按模态阶次变化的规律性很强,并且关于轴对称(切向响应第1阶振型除外);径向激振的径向响应模态特性与轿车斜交轮胎相似;在相同频率下径向激振的径向响应与切向响应振型不完全一致。The mode parameters of motorcycle tire were collected by combining the time domain and frequency domain of the testing system,and compared with those of passenger car tire.The results showed that the natural frequency of motorcycle tire at first stage was higher than that of passenger car tire;at each stage the mode shape of motorcycle tire under radial excitation was highly influenced by mode stage variation,and was axially symmetric（except first stage in tangential response）;radial response mode feature of motorcycle tire under radial excitation was similar with that of car bias tire;the mode shapes of radial response and tangential response of motorcycle tire under radial excitation were different at same frequency.

关 键 词：摩托车轮胎 模态参数 激振试验 模态识别 

分 类 号：TQ336.11[化学工程—橡胶工业]