检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]中南大学材料科学与工程学院 [2]中南大学有色金属材料科学与工程教育部重点实验室,湖南长沙410083
出 处:《高分子材料科学与工程》2010年第8期80-82,86,共4页Polymer Materials Science & Engineering
摘 要:采用三种不同固化收缩率的树脂配制了三种导电胶。通过实验研究了等温固化过程中树脂基体的固化收缩率对导电胶体积电阻率的影响。研究结果表明,树脂基体的固化收缩率越大,对应导电胶的体积电阻率越小。导电胶的体积电阻率与固化时间呈指数关系。导电胶在未固化时体积电阻率极大,其导电性的建立发生在树脂基体的凝胶化阶段,且在这一阶段中导电胶的电阻率急剧下降,凝胶化阶段完成后的导电胶电阻率变化较小。Based on three matrixes with different curing shrinkage, three electrical conductive adhesives were prepared. The effects of curing shrinkage of matrix in isothermal cure on the conductivity of electrical conductive adhesive were studied by some experiments. The results show that the volume resistivity of the electrical conductive adhesives is smaller when choosing the matrix with greater curing shrinkage. There is a power law dependence of the curing shrinkage of matrix upon the curing time. The conductive adhesives are nearly insulated before cured. As to conductive adhesives, the conductivity establishment is completed during the gelation stage, the conductivity drops sharply first and then changes slightly in the process of the conductivity establishment.
分 类 号:TQ324.8[化学工程—合成树脂塑料工业]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.145