水曲柳弯翘木皮恢复平直工艺  

Technology for Recovering of Warped Fraxinus Mandshurica Wood Veneer

作　　者：徐开蒙[1] 涂登云[1,2] 曹海波[1] 潘成锋 劳奕旻 李凯夫[1] 

机构地区：[1]华南农业大学林学院,广州510642 [2]浙江世友水业有限公司研发中心,湖州313009

出　　处：《林产工业》2010年第5期10-12,共3页China Forest Products Industry

基　　金：浙江省农业科技成果转化资金项目:“弯翘板再利用复原技术中试”(2006D70036);科技部科技人员服务企业行动项目:木材热改色技术及产品开发与产业化(2009GJC20048)

摘　　要：以3.4mm厚水曲柳弯翘木皮为研究对象,研究采用不同温度的湿空气和不同时间处理对弯翘木皮扭曲度恢复程度的影响。结果表明:在干湿球温差1℃情况下,当处理温度从70℃上升到100℃,温度越高,木皮扭曲度恢复效果越好,从1h延长到3h,处理时间越长,木皮扭曲度恢复效果也越好。结合实际生产需求,生产上较佳的工艺参数为:温度90℃、干湿球温差1℃、处理时间2h。Taking 3.4mm warped Fraxinus Mandshurica wood veneer as the research object,the authors of this paper studied the effect of wet air treatment under different conditions（different air temperature,and different treatment time）.The research result showed that：under the situation of 1℃of dry-wet bulb temperature difference,along with the treating temperature increasing from 70℃to 100℃and the treating time lasting from 1h to 3hs,the recover effect was strengthened.In consideration of the actual production situations,the authors suggest that the optimum technological parameters should be：90℃of temperature,1℃of dry-wet bulb temperature difference,and 2hs of processing time.

关 键 词：弯翘木皮 水曲柳 残余形变 

分 类 号：TS652[轻工技术与工程]