纤维素酶预处理提高二次纤维的磨浆效果  

Improvement of Refining of Secondary Fiber from Old Carton by Cellulase Pretreatment

作　　者：黄金锋[1] 翁景峥[1] 卢玉栋[1] 吴宗华[1] 

机构地区：[1]福建师范大学化学与材料学院,福州350007

出　　处：《华东纸业》2010年第5期71-74,共4页Shanghai Paper Making

摘　　要：研究了纤维素酶预处理对废纸箱二次纤维磨浆效果的影响。结果表明,纤维酶的种类、用量、预处理时间、pH值等对纤维素酶的作用效果影响大。纤维酶-5在用量为0.05%、预处理时间为45min和pH值7.7的条件下可使磨浆后的二次纤维的打浆度、环压指数和抗张指数分别达到26°SR、7.0N·m·g^(-1)和30.8 N·m·g^(-1),分别比未用酶预处理的对照二次纤维增加44.4%、18.6%和25.2%。The effect of cellulase pretreatment on refining of secondary fiber from old carton was investigated. The results showed that the type and dosage of cellulases, pretreatment time, pH value influenced greatly the effectss of the cellulase on refining. The beating degree, ring pressure index and tensile index of the secondary fiber pretreated with cellulase -5 were 26 °SR, 7.0 N·m·g^-1 and 30.8N·m·g^-1, respectively, under the conditions of cellulase -5 amount of 0.05%, pretreatment time of 45 rain and pH value of 7.7. These values were 44.4%, 18.6% and 25.2% larger than those of the blank fiber without pretreatment by the cellulases.

关 键 词：纤维素酶 磨浆 打浆度 机械强度 

分 类 号：TS724[轻工技术与工程—制浆造纸工程]