暂时冠桥树脂材料边缘适合性的体外研究  

In vitro Marginal Adaptation of Single Crowns Fabricated from Several Provisional Resins

作　　者：谢超[1] 韩颖[2] 梁猛猛[2] 何惠明[2] 

机构地区：[1]第四军医大学口腔医学院种植科,陕西西安710032 [2]第四军医大学口腔医学院修复科

出　　处：《口腔医学研究》2010年第5期643-645,共3页Journal of Oral Science Research

摘　　要：目的:比较5种暂时冠桥修复树脂材料直接法制作暂时冠的边缘适合性。方法:使用超硬石膏翻制标准铝制基牙代型40个,在石膏代型上制作标准后牙蜡型,随机分为5组,硅橡胶印模材料制取阴模型腔,去除蜡型后,分别使用5种暂时修复树脂材料(Protemp 3 Garant、Luxatemp、Luxatemp Solar、QuickResin和Curefast)直接法制作树脂单冠。暂时冠在石膏代型上完全就位后,SEM下测量树脂冠边缘与石膏代型边缘之间的边缘间隙。结果:单因素方差分析结果显示各材料组之间的边缘间隙存在显著性差异(P<0.05),Protemp 3 Garant和Luxatemp两种材料的边缘间隙显著小于Luxatemp Solar、QuickResin和Curefast(P<0.05),QuickResin材料的暂时冠具有最大的边缘间隙。结论:化学固化复合树脂材料暂时冠边缘适合性优于PMMA类树脂材料;双固化bis-acryl复合树脂和PMMA类树脂材料边缘适合性较差,不推荐临床使用。Objective：To compare the marginal adaptation of single crown fabricated from 5provisional resin materials.Methods：40 gypsum dies were duplicated from a standard aluminum die.Wax patterns with similar molar shape were then made on all gypsum dies.The gypsum die/wax pattern assemblies were divided randomly into 5 experimental groups.A direct technique was used to fabricate 40 provisional resinous crowns with 5materials：Protemp 3 Garant,Luxatemp,Luxatemp Solar,Quick Resin and Curefast.The provisional crowns were fabricated on these gypsum dies with a silicone rubber impression as a matrix.Marginal discrepancy of provisional crowns was measured under SEM observation after provisional crowns were seated on gypsum dies.Results：One-way ANOVA showed that significant difference was observed among 5experimental groups（P〈0.05）.The marginal discrepancies of Protemp 3 Garant and Luxatemp were significantly smaller than Luxatemp Solar,QuickResin and Curefast（P〈0.05）.QuickResin exhibited the most marginal discrepancies.Conclusion：Provisional crowns made from chemical-cured provisonal composite materials produced better marginal adaptation compared with PMMA provisional materials.

关 键 词：暂时修复材料 边缘适合性 边缘间隙 

分 类 号：R783.1[医药卫生—口腔医学]