检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]西北工业大学力学与土木建筑学院,陕西西安710129
出 处:《计算机仿真》2010年第12期386-390,共5页Computer Simulation
摘 要:研究地震问题,针对商住楼住宅结构地震时易产生应力突变问题,为提高抗震能力,对带转换层的商住楼在地震作用下的输入能进行研究。传统方法将多自由度模型简化为第一振型等效的单自由度系统再计算输入能,但商住楼模型精度不够。根据振型分解法导出了弹性多自由度系统与弹性单自由度系统地震输入能之间的关系,并采用直接积分法推导出了结构各层的输入能量,并进行仿真。结果表明,弹性多自由度系统的地震总输入能可以由所有振型的地震输入能线性叠加得到。通过对转换层模型进行分析发现结构总输入能可以由前几阶振型输入能叠加得到,且精度较高,明确地震输入能量会在转换层发生聚集,各层能量分析更准确,可为设计提供参考。The research on seismic energy response of the high-rise buildings with transfer story is carried out by the guidance of the concept of energy based on seismic design method.Traditionally the input energy is calculated after the MDOF is simplified to the SDOF.However,using this method with the model may lack accuracy.The relationship between the elastic input energy of the MDOF and the elastic input energy of the SDOF is derived based on Mode-Superposition method,also the input energy of every floor is figure out by time history analysis method.The research results show that the input energy of the elastic MDOF can be expressed as a linear combination of the input energy of every vibration mode.The research on the example indicates that the first few modes are sufficient to obtain the input energy.The energy concentration will occur at transfer story,and that is proportional to the mass,inversely proportional to the stiffness.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.28