新型复合曲面型砧的设计  

Design of New-type Composite Surface Anvil

作　　者：李静[1] 孟祥龙[1] 柴民杰[1] 于晶晶[2] 

机构地区：[1]邢台职业技术学院机电工程系,河北邢台054035 [2]河北科技师范学院机电工程学院,河北秦皇岛066004

出　　处：《热加工工艺》2011年第1期16-18,共3页Hot Working Technology

基　　金：国家自然科学基金重点项目(50435010);973重大基础研究前期研究专项项目(2004CCA066000)

摘　　要：以大型钢锭锻造过程为研究对象,创新设计一种新型复合曲面型砧对锻件进行锻造;采用非线性有限元和物理模拟实验方法,通过理论建模和数值模拟,对大锻件内部组织变形的均匀性进行研究,以求找出在用不同形状砧子进行锻造时,锻件内部的应力、应变状态。以DEFORM软件为平台,对新型复合曲面型砧的锻造过程进行有限元模拟;根据影响锻造效果的主要因素砧宽比、型砧角度和设计复合曲面型砧所需的镜像线高度,特设计几种不同几何参数的工况,以求解出复合曲面型砧的最佳几何参数。Taking large-scale steel ingot forging process as study object,a new-type compound surface anvil was innovatively designed to forge forgings.Using nonlinear finite element and physical analogue experimental technique,the uniformity of the internal structure deformation in heavy forgings was researched by theory modeling and numerical simulation to find the internal stress and strain state in the heavy forgings with different shape anvils.Taking DEFORM as platform,the forging progress with new-type compound surface anvil was simulated by finite element method;thinking of the primary factors of influencing forging effect,such as anvil width ratio,anvil＇s angle and the altitude of mirror image line,the different geometric parameters were designed to find the best geometric parameters with the compound surface anvil.

关 键 词：大型轧辊锻件 复合曲面型砧 有限元方法 数值模拟 锻造方法 

分 类 号：TG315.2[金属学及工艺—金属压力加工]