花键冷滚压成形力测试与分析  

Test and analysis of the rorming force in cold rolling spline

作　　者：刘志奇[1,2] 李永堂[1,2] 李旭东[1] 齐会萍[2] 

机构地区：[1]兰州理工大学甘肃省有色金属新材料国家重点实验室,兰州730050 [2]太原科技大学机电工程学院,太原030024

出　　处：《机械设计与制造》2011年第1期188-190,共3页Machinery Design & Manufacture

基　　金：国家自然科学基金资助项目(50675145);山西省科技攻关项目(2006031147)

摘　　要：根据花键冷滚压加工原理,按机床受力,将加工过程中的滚压力分为主轴转矩和径向进给力两部分。设计测试方案,用计算机数据采集系统测得了主轴转矩和径向进给力在滚压过程中的实时变化曲线,分析了它们的变化特征,得出压入阶段结束时滚压力取最大值。对不同的工艺参数进行实验,得到了工艺参数对最大滚压力的影响规律。The rolling force in cold rolling spline was divided into the spindle torque and the radial feed force according to the principal of cold rolling spline.By the computer data collection system,spindle torque and radial feed force were measured on the special cold rolling spline machine.Changes curves of spline cold roll forming force were obtained.The variation characteristics of the deformation force in different forming stage were analyzed.It＇s obtained that the rolling force was maximum in the end of feeding stage.The experiments on different technology parameters were done and the influence rules of the technology parameters on the maximum rolling force were obtained.

关 键 词：花键 冷滚压 成形力 

分 类 号：TH16[机械工程—机械制造及自动化] TG301[金属学及工艺—金属压力加工]