PP/PBT/PP-MAH共混熔体的流变性能研究  

STUDY ON MELT RHEOLOGICAL BEHAVIOR OF BLENDS OF PP/PBT/PP MAH

作　　者：齐宏进[1] 黄志刚[1] 马兆立[1] 张浴晖 刘决康 

机构地区：[1]青岛大学化工系,青岛266071

出　　处：《高分子材料科学与工程》1999年第6期88-91,共4页Polymer Materials Science & Engineering

摘　　要：研究了不同比例（３％ ～１８％ （质量）ＰＢＴ）的聚丙烯（ＰＰ）、聚对苯二甲酸丁二酯（ＰＢＴ）及聚丙烯接枝马来酸酐（ＰＰ－ＭＡＨ）熔体的流变学行为。用ＲＭＳ－６０５ 毛细管流变仪在不同温度下（２４０ ℃、２５５ ℃和２７０ ℃）进行了测定，并讨论了共混体组成、剪切速率和剪切强度对流动曲线、熔体粘度及熔体弹性的影响。该共混熔体属假塑性流体（切力变稀型）。ＰＢＴ含量从３％ ～１３％ ，其假塑性变化相当一致，而ＰＢＴ含量为１８％ 时，共混体假塑性增加的趋势明显。熔体活化能随共混比例不同而呈现无规律变化。The melt rheological behavior of the blend of polyporpylene(PP), polybutylene terephthalat(PBT), and polypropylene maletic anhydride(PP MAH) at varying blending ratios(from 3 mass% to 18 mass% PBT content) was studied. Measurements made on a RMS 605 capillary rheometer at three different temperature(240 ℃, 255 ℃ and 270 ℃) are presented and discussed for the effects of blend composition, shear rate and shear stress on flow curves, melt viscosity and melt elasticity. The blends are pseudoplastic(shear thinning). Variation of pseudoplasticity of blends is quite consistent from 3 mass% to 13 mass% PBT, while with 18 mass%, a trend of increasing pseudoplasticity is apparent. Variation of melt activity energy with the blending ratio is quite irregular.

关 键 词：聚丙烯 共混 熔体 流变学 MAH PBT 

分 类 号：O631.21[理学—高分子化学]