基于Pro/E4.0运动学仿真的中心孔夹爪分析及研究  

Alterlation of Fixture with Motion Simulation Based on Pro/Engineer 4.0

作　　者：柴保明[1] 王志腾[1] 王鹏[1] 李文选[1] 

机构地区：[1]河北工程大学机电学院,河北邯郸056038

出　　处：《煤矿机械》2011年第4期223-225,共3页Coal Mine Machinery

基　　金：东风汽车车轮有限公司年度重点质量改善课题(DFW1018)

摘　　要：以某机械设备中心孔夹爪工作时存在产品划伤问题,将连杆机构为研究对象,通过Pro/E4.0三维设计软件对其运动机构进行运动仿真分析,得出夹爪运动过程轨迹图和零件划伤的真正原因,并进一步对夹爪结构进行改造,彻底解决夹爪工作过程中底部划伤问题,在此基础上总结出Pro/E4.0运动学仿真在现代机械维修过程中的应用。To work in a center hole fixrure problem of Italian S530 exists for the product scratch point, the linkage mechanism for the study, three-dimensional design software by Pro/Engineer 4.0 exercise of its movement mechanism simulation analysis gripper movement trajectories and parts scratched the real reasons for the further transformation of the structure of the fixture, fixture work solve the process of scratching the bottom of the problem, on the basis of kinematics simulation summarized Pro/E4.0 mechanical maintenance process in the modern areas of application.

关 键 词：夹爪 连杆机构 运动仿真 改造 

分 类 号：TH133.5[机械工程—机械制造及自动化] TP391.9[自动化与计算机技术—计算机应用技术]