蜂窝体胞尺寸对夹芯板性能的影响研究  

Effects of Honeycomb Cell Size on Performances of Sandwich Panels

作　　者：孙士平[1] 赖余东[1] 

机构地区：[1]南昌航空大学航空制造工程学院,南昌330063

出　　处：《航空材料学报》2011年第2期61-66,共6页Journal of Aeronautical Materials

基　　金：国家自然科学基金(11062009);江西省教育厅科技项目(GJJ09189);南昌航空大学研究生创新基金(YC2010007)

摘　　要：研究了周期性夹芯蜂窝体胞尺寸对夹芯板刚度性能、一阶频率的影响规律。以夹芯均匀化等效的夹芯板模型为基准,定义无量纲尺寸影响因子,描述不同蜂窝尺寸夹芯板性能相对均匀化等效模型基准值的变化趋势,量化蜂窝尺寸的影响程度。采用有限元数值方法,开展了不同尺寸、不同构型以及不同边界条件下蜂窝夹芯板性能的比较分析。计算结果表明:夹芯板的刚度性能与频率具有尺寸效应,当夹芯尺寸与蜂窝尺寸比值大于12,蜂窝尺寸的影响程度趋于平缓减弱,当蜂窝尺寸与夹芯尺寸相当时,蜂窝尺寸的影响非常明显,其影响程度与边界条件及蜂窝构型显著相关。Honeycomb sandwich panel was studied to reveal the effects of the cell size in the static analysis and the free vibration analysis.The response of the sandwich panel with the homogenized cores was used as the standard of comparison.The ratio of the responses of the detailed finite element models of sandwich panels to the corresponding comparison solutions was defined as a Size Influencing Index that reflects the influences of the size variation of different cell configuration.Based finite element technique,the static and the free variation response of honeycomb sandwich panels with the different cores and the homogenized cores were analyzed comparatively,under three typical boundary conditions,including the hexagonal,triangular and square honeycomb core.The computed results reveal the size effect of the honeycomb cell on the stiffness and the frequency behavior of sandwich panel.It is shown that when the ratio of the macrostructure size to the cell size is larger than 12,the influence of the cell size on the sandwich panel performances tends to gentle weakening.Meanwhile,when the cell size and macrostructure size are comparable with each other,the size effect is quite obvious,and the degree of influence is significantly dependent on the boundary condition and the cell configuration.

关 键 词：尺寸效应 尺寸影响因子 夹芯板 蜂窝体胞 均匀化方法 

分 类 号：TB30[一般工业技术—材料科学与工程]